Steel Building Insulation in Rehoboth, Massachusetts
Building Outlet supplied this steel building insulation in Rehoboth, Massachusetts, in August of 2022.
We supplied the insulation and accessories used to insulate a 30’x50’x12’ metal building. The clear-span metal building with a 3:12 roof pitch now has 3.5” of R-11 insulation installed in its roof and walls, which leads to lower energy bills for the building owner. The insulation also acts as a barrier against condensation, which can help lengthen the lifespan of the metal building.
Heavy-duty WMP-VRR Plus facing lines the inward-facing side of the insulation system, which conceals it and gives the inside of the building a clean, finished look. Insulation rolls supplied for this project included:
- (5) 48”x31’ rolls
- (1) 56”x14’ roll
- (2) 58”x27’ rolls
- (1) 57”x14’ roll
- (2) 48”x24’ rolls
- (1) 48”x19’ roll
- (1) 55”x20’ roll
- (1) 48”x12’ roll
Steel Building Insulation also delivered a variety of accessories alongside the insulation to hold the insulation system in place. A 500’ of White steel banding, (125) #`12 White self-tapping Tek screws, (1) 150’ roll of patch tape, and (1) 180’ roll of double-faced tape are among the accessories supplied for this insulation job.
Total Area Insulated | 1,500 square feet |
Roof Insulation | 3.5″ Single Layer Insulation System |
R-Value (Roofs) | R-11 |
Wall Insulation | 3.5″ Single Layer Insulation System |
R-Value (Walls) | R-11 |
Facing Material | WMP-VRR Plus Facing |
County | Bristol County |
Located in southeastern Massachusetts, the town of Rehoboth is part of Bristol County. Among Massachusetts’ first towns to incorporate, Rehoboth is a historic community bordering Seekonk, Attleboro, Norton, Taunton, Dighton, and Swansea. It sits about 50 miles south of Boston and roughly 10 miles east of Providence, Rhode Island.
STEEL BUILDING INSULATION
CONTACT US
303-867-1179 | 1-800-486-8415
(*All Calls Are Recorded)