Steel Building Insulation in Ohio
Steel Building Insulation, a division of Building Outlet Corp., has provided affordable insulation repair solutions to Ohio consumers for more than 30 years. We offer an extensive line of name-brand, top quality insulation blankets and related products and accessories available at drastically reduced prices.
When Ohio metal building owners, architects and contractors see drastic increases in their thermal energy and building maintenance costs, the primary cause is often damaged, faulty or inadequate metal building insulation.
Whether your intent is to keep heat in or out, repairing or replacing your building or commercial space’s current insulation system drastically reduces your usage of expensive heating and cooling equipment. While there are a variety of factors like fire, pests, moisture and condensation issues that can wreak havoc on existing metal building insulation, rectifying these problems is surprisingly manageable and affordable, particularly when compared with the substantial costs associated with thermal energy loss.
Condensation issues are among the most common and can result from a lack of insulation, insufficient insulation or damaged or torn insulation. Steel Building Insulation provides insulation blankets for metal building and vinyl insulation repair projects in a wide range of R-values depending on your desired level of effectiveness. We often recommend double-layer, high R-Value systems for insulation repair, as these have proven extremely effective in condensation prevention.
Our insulation panels and blankets can be delivered to virtually any accessible jobsite, and will arrive to you in color-coded, pre-cut rolls to allow for seamless installation. In addition to insulation panels, Steel Building Insulation carries facings, tabs and a multitude of accessories such as metal building insulation patch tape, steel banding, thermal blocks, and washer and stick pins to assist you with insulation repair projects of any size or scope.
Contact Us to find out how adequately insulating or repairing existing insulation in your metal building will save you tremendous amounts of money over its lifetime.
Our insulation panels and insulation blankets are crafted from highly-resilient fiber glass and are available with a variety of facing options, and offer high R-values that offer substantial resistance to heat transfer, resulting in lower utility costs from the time of installation. Facings are available in both white vinyl and polypropylene, and range from light-duty, low-cost WMP-VR to the extremely heavy-duty, high impact GYMGUARD materials. Our insulation rolls are are available in 3’, 4’, 5 and 6’ standard-width roll sizes, and can be delivered to virtually any accessible building site. Our products are professionally color-coded, pre-cut rolls intended to simplify the installation process.
While Arizona does not currently have any statewide energy codes for commercial structures, our metal building insulation product line adheres to the standards set by the North American Insulation Manufacturers Association (NAIMA), and are fire-resistant and non-combustible.
Our advisors can help you understand the requirements for your specific county. Call 1-800-486-8415.
Ohio IECC Building Energy Codes | COMcheck Compliance
Current Building Energy Code for Ohio: 2012 IECC with Amendments
Amendments / Additional State Code Information:
2012 IECC and ASHRAE 90.1-2010 with amendments Commercial
1. Section C101.4.3
a. Exception 5 shall read “Roof recover or roof repair.”
b. Exception 6 shall read “Roofs without insulation in the cavity and where the sheathing or insulation is exposed during reroofing shall be insulated either above or below the sheathing.”
c. Renumber exceptions 6, 7, and 8 as 7, 8, and 9.
2. Section C202 add the following definitions:
REROOFING. The process of recovering or replacing an existing roof covering. See “Roof recover” and “Roof replacement.”
ROOF RECOVER. The process of installing an additional roof covering over a prepared existing roof covering without removing the existing roof covering.
ROOF REPAIR. Reconstruction or renewal of any part of an existing roof for the purpose of its maintenance.
ROOF REPLACEMENT. The process of removing the existing roof covering, repairing any damaged substrate and installing a new roof covering.
3. Section C402.2.1.1: Delete existing section and Table C402.2.1.1 and replace with new section which reads “C402.2.1.1 Roof replacement. For roof replacements, where the existing roof assembly is part of the building thermal envelope and contains insulation entirely above deck, roof replacement shall include compliance with the requirements of Table C402.1.2 or Table C 402.2.” 1301.3
Modifications to ASHRAE 90.1.The following changes shall be made to the ASHRAE 90.1:
Addenda ap, cj, and de included in the ASHRAE “Standard 90.1 -2010 Addenda 2013 Supplement Package” as found on the ASHRAE website are also adopted and intended to be applicable to computer rooms and data centers. Addenda dd included in the ASHRAE “Standard 90.1 -2010 Addenda 2013 Supplement Package” as found on the ASHRAE website is also adopted and intended to be applicable to roofing projects. Section 18.104.22.168 Circulating Pump Controls: Disregard/Delete section. Section 8.4.2 Automatic Receptacle Control: Disregard/Delete section.
Approved Compliance Tool: COMcheck
*Code Enforcement is Mandatory in the State of Ohio.
Some of the areas in Ohio that we deliver to:
- Columbus, Ohio
- Cleveland, Ohio
- Cincinnati, Ohio
- Toledo, Ohio
- Akron, Ohio
- Dayton, Ohio
- Parma, Ohio
- Canton, Ohio
- Youngstown, Ohio
- Lorain, Ohio