Metal Building Insulation Accessories

 

 

Used to patch holes and vapor seal metal building insulation facing. Rolls are 3"x150'.

Used to temporarily hold up insulation before exterior sheeting is installed. Rolls are 11/2"x180'.

Used to provide a thermal break between red iron and exterioir wall sheeting. Rolls are 1/8"x3"x75'.

Used in retro fit and high r-value insulation systems. Rolls are 1"x500'. 20 gauge.

Used to hang insulation in steel building retro fit and high r-value jobs. Coils are 1"x100'.

Used with adhesive to hang insulation in retro fit jobs. Pin size varies with insulation blanket thickness.

Plastic pin with washer used to fasten insulation on arched steel buildings. Pins size varies with blanket thickness.

Used with nail to help secure insulation blankets to walls in pole buildings. Also, gives a finished look.

Used to isolate the outer shell from the inside framing. Blocks are 1"x5"x6'.

Used to cut fiberglass blankets and foam insulated panels.

Facings are laminated to fiberglass blankets and used as a vapor retarder in metal buildings.